7 Common Garage Door Problems and How to Fix Them Yourself

Having a garage door is essential to the security and convenience of your home. But they often face wear and tear. Here are seven issues most homeowners face in Santa Clarita—and how to fix them.

Garage Door Won’t Open or Close Properly

The basics are the best place to start if your door isn’t moving. Make sure the opener is connected to power. Take a look at the wall switch and remote control. It is necessary to replace dead batteries. If the opener hums but doesn’t move, the motor might be failing.

It is also important to inspect the door tracks. If the rollers are clogged with debris or dirt, remove it. 3-IN-ONE Garage Door Lube is a great garage-specific lubricant to use on all moving parts.

Loud Noises and Vibrations

queaks and grinding indicate that metal parts are dry or misaligned. Using a small amount of lubricant, apply it to the springs, the rollers, and the hinges. If the noise continues, the problem could be worn-out rollers or loose hardware.

Tighten any loose nuts and bolts. If your rollers are metal, think about switching to nylon ones. They’re quieter and last longer.

Off-Track Garage Door Rollers

There is a danger associated with a garage door that is off track. Do not use the door at all. Manually open it and inspect the track and rollers.

To secure the door, use locking pliers. Using a rubber mallet, gently guide the roller back into the track. I would appreciate it if you did not force them. For bent track repairs, call a Santa Clarita pro.

Broken Garage Door Torsion Spring

Broken torsion springs can cause a loud bang in your garage. The spring is likely to be the cause of a heavy door or a door that won’t lift.

You should not attempt to replace the torsion spring yourself. There is a high amount of tension on it, and it can cause injury. Contact a technician who is certified. It depends on the type of spring, but you can expect to pay $150 to $300 for it.

Opener Malfunctions: Chain, Motor, Remote

A stripped gear may cause the opener’s chain to move but not the door. When a motor buzzes but doesn’t run, the capacitor may be faulty.

The opener may need to be reset. You should consult the manual. You may need to reprogram the remote if it isn’t working. Support is available on the websites of brands such as LiftMaster and Chamberlain.

Misaligned safety sensors

Check the sensors if the door reverses or does not close. Both should be clean and aligned. There should be a solid green or red light between them, and they should face each other directly.

Misalignment can be caused by dust, spider webs, or bumps. Adjust them gently and wipe them clean with a dry cloth. After each adjustment, test the door.

How Santa Clarita’s Climate Affects Operation

In Santa Clarita, the dry heat and dust cause metal parts to wear out faster. Tracks become dusty as time passes. It dries quickly after lubricant has been applied.

Maintenance should be scheduled during the season. Every three months, clean the tracks and lubricate the parts. You should use weather seals to prevent dirt and temperature swings from getting into cables.

These fixes will save you money and reduce stress. In case of serious issues, it is always best to contact a professional. Your Santa Clarita garage door will run smoothly year-round with regular maintenance.

Would you like help right away? Get in touch with a local garage door repair expert today.